굴삭기 및 불도저용 템퍼링 기능이 있는 트랙 링크 유도 경화 라인

Ⅰ. Track Link Hardening and Tempering Line Overview

The production line incorporates dedicated processing positions, a mechanical transport system and coordinated operating controls.

Its horizontal hardening machine uses a dual-workpiece arrangement, while the transport configuration supports dual-channel and batch processing applications.

The exact equipment layout and processing sequence are determined by the workpiece specifications and production requirements.

Ⅱ. Track Link Tread Surface Hardening

Track links have a different geometry from conventional shafts, rods and cylindrical parts. Their connecting holes, irregular cross-sections and defined roller-contact surfaces require dedicated workholding and heating arrangements.

Tread Surface Treatment

The primary treatment area is the track link tread or rail surface.

Induction heating is used to heat the required surface region before quenching. The induction coil and workpiece positioning system are designed around the specified treatment area.

The required heating pattern depends on the material, surface geometry, coil position and operating conditions.

Workpiece Requirements

The equipment configuration takes account of:

•Track link material and initial heat treatment condition

•Link pitch and overall dimensions

•Tread surface geometry and treatment location

•필요한 표면 경도

•Effective hardened case depth

•Production quantity and workpiece variety

Different track link specifications may require adjustments to the fixture, induction coil and operating program.

Hardening results must be verified against the customer’s material and inspection requirements.

Ⅲ. Induction Heating and Quenching Process

The hardening machine combines controlled workpiece positioning, induction heating and quenching.

공작물 포지셔닝

The track link is located and supported by dedicated mechanical fixtures.

The documented machine design uses guide-wheel positioning and provides for adjustment of the clearance between the inductor and workpiece.

These features help establish the required relationship between the induction coil and the tread surface during processing.

유도 가열

The induction power supply delivers energy to the 유도 코일, generating an alternating electromagnetic field that heats the selected conductive region of the workpiece.

The heating arrangement is matched to the track link geometry and required hardening area.

Depending on the selected processing program, the machine supports different operating methods, 포함하여:

•Fixed-position timed hardening

•Programmed positioning and 스캐닝

•Section-by-section positioning

•Stepwise preheating and quenching

The appropriate operating method depends on the workpiece geometry and heat treatment requirements.

담금질

가열 후, the specified surface region is quenched under conditions selected for the track link material.

The quenching system is coordinated with the heating sequence and workpiece positioning mechanism.

The documented equipment includes quenching-liquid collection, filtration and supporting cooling-water and pump-control systems.

The required quenching conditions are established according to the target hardness, hardened depth and material properties.

Ⅴ. Tempering and Post-Tempering Cooling

Tempering forms part of the complete track link heat treatment production line.

담광 후, the track link proceeds to the 템퍼링 단계. Tempering is used to adjust the properties of the hardened material according to the required mechanical performance.

The appropriate tempering conditions depend on the material grade and specified heat treatment requirements.

Tempering Section

The production line includes a dedicated tempering operation following the hardening process.

The heating method, temperature and operating sequence of the tempering equipment are established according to the selected line configuration.

Post-Tempering Cooling

템퍼링 후, the workpiece passes through a subsequent cooling stage.

The cooling operation is coordinated with the transport system to support movement through the production sequence.

The arrangement of the hardening, tempering and cooling sections is determined by the required production process and available equipment layout.

Ⅴ. Horizontal Dual-Workpiece Machine and Transfer System

The KECHUANG equipment uses a horizontal, programmable hardening machine with a dual-workpiece processing arrangement.

The mechanical structure supports workpiece positioning, induction heating operations and controlled movement.

Dedicated Workpiece Fixtures

The fixture system accommodates the geometry of crawler track links.

Guide-wheel positioning helps locate the workpiece, while the induction coil clearance can be adjusted according to the selected processing requirements.

Fixtures and guides are configured for the applicable track link dimensions and treatment area.

Mechanical Movement and Support

The documented machine structure includes positioning and supporting mechanisms, a workpiece rotation mechanism, lifting and guiding components, and a counterbalance arrangement.

These components form part of the machine’s mechanical design. Their specific operation and coordination depend on the selected equipment configuration.

Dual-Channel Workpiece Transfer

A conveyor system moves workpieces through the production arrangement.

The equipment is designed to support dual-channel operation and batch treatment of crawler track links.

The dual-workpiece machine arrangement and dual-channel transfer arrangement describe different aspects of the equipment. They do not necessarily mean that two workpieces are heated simultaneously.

Adaptation to Different Track Link Pitches

The equipment is intended to accommodate track links with different pitches.

The applicable size range, adjustment method and fixture configuration are established according to the customer’s workpiece drawings.

Ⅵ. CNC/PLC Control and Auxiliary Systems

The track link hardening line integrates electrical control, mechanical movement and induction power regulation.

Programmable Process Control

The equipment can use a CNC or PLC-based control system together with variable-frequency speed control.

The control arrangement supports workpiece positioning and scanning operations, while communication between the PLC and induction power supply coordinates the heating sequence.

For CNC-equipped configurations, processing programs can be prepared and stored for different workpiece requirements.

This allows the machine to operate according to the selected track link specification without requiring continuous manual adjustment during the programmed hardening cycle.

Electrical Equipment Arrangement

The documented machine design places the control cabinet and transformer cabinet separately.

This arrangement provides access to the relevant electrical equipment and supports adjustment and maintenance.

The machine also includes a mounting and adjustment arrangement for the hardening transformer.

Supporting Machine Systems

The published equipment configuration includes:

•Quenching-liquid collection system

•Quenching-liquid filtration system

•Cooling-water circuit and pump-control system

•Door-control system

•Workpiece transport control

•Lifting and guiding mechanism

•Counterbalance mechanism

•Water-mist collection system

The production line documentation also identifies an energy and quality-control analysis system.

The specific measurements, analysis functions and available interfaces of this system should be defined in the equipment specification for the selected project.

Ⅶ. Machine Configuration and Technical Requirements

The complete line combines the main hardening machine with the tempering, 냉각, transfer and auxiliary equipment required for the selected production process.

주요 장비 구성

체계	기능
경화기	수평, dual-workpiece programmable processing arrangement
유도 전원 공급 장치	Provides energy for induction heating
유도 코일	Designed for the specified track link tread surface
공작물 고정 장치	Supports and positions the track link
Guide-Wheel Positioning	Helps establish the required workpiece position
Transformer Assembly	Supports the induction heating arrangement and its adjustment
Mechanical Movement	Provides positioning, scanning and related machine movement functions
담금질 시스템	Cools the heated treatment area
Quenching-Liquid Collection and Filtration	Supports quenching-liquid handling
Tempering Section	Performs the subsequent tempering operation
Post-Tempering Cooling	Provides cooling after tempering
Conveyor and Transfer System	Moves workpieces between processing positions
CNC/PLC Control	Coordinates workpiece movement and machine operation
Auxiliary Systems	Cooling-water control, door control, mist collection and other supporting mechanisms

Technical Parameters for Equipment Selection

The following parameters are established according to the customer’s track link specifications and production requirements.

매개변수	Selection Requirement
Applicable Workpiece	Crawler track links
치료 부위	Track link tread / rail surface
Primary Hardening Method	Induction heating and quenching
Production Process	경화는, tempering and post-tempering cooling
처리 배열	Horizontal dual-workpiece hardening machine
Transfer Arrangement	Dual-channel and batch-processing capability
유도전력	Selected according to the heating requirements
동작 주파수	Matched to the heating pattern and required hardening depth
Applicable Link Pitch	Determined by fixture and transfer configuration
목표 경도	According to customer specifications
효과적인 케이스 깊이	According to material and treatment requirements
생산 능력	Determined by the complete processing sequence
제어 시스템	CNC or PLC-based configuration

실제 전력, 주파수, processing dimensions, production capacity and heat treatment parameters are specified for the selected equipment.

The final configuration must be matched to the material, track link geometry and required treatment results.

Ⅷ. Applications and Customized Equipment Selection

이 track link induction hardening and tempering line is intended for manufacturers processing crawler undercarriage components.

Potential applications include suitable track link designs used in:

•굴삭기

•Bulldozers

•Crawler tractors

•Mining and earthmoving machinery

•Other tracked industrial equipment

The applicable workpiece range depends on the material, geometry and required treatment conditions.

How to Select the Right Track Link Hardening Line

Equipment selection begins with the actual track link.

The link pitch and geometry determine the fixture and transfer requirements. The specified tread surface and hardening depth guide the induction coil design and processing conditions.

Required production quantity and workpiece variety influence the machine layout, transport configuration and program requirements.

Where hardness and case-depth specifications are available, process trials may be necessary to establish and verify the required heating, 담금질 및 템퍼링 조건.

Request a Customized Track Link Hardening and Tempering Line

KECHUANG provides customized induction hardening equipment and integrated heat treatment systems for crawler track link manufacturing.

For an equipment evaluation, 보내주세요:

•Track link drawings or photos

•재료 등급

•Link pitch and main dimensions

•Required tread surface treatment area

•Target hardness and effective case depth

•Expected production quantity

가능한 경우, please also provide tempering requirements, inspection standards and your existing production-line layout.

Our engineering team can evaluate the induction heating assembly, 공작물 위치 지정, transfer system, 담금질 배열, tempering section and operating controls according to your manufacturing requirements.

자주 묻는 질문

답변을 펼치려면 질문을 클릭하세요..

+What does the track link induction hardening line treat?

The line hardens and tempers the tread (철도) surface of crawler track links — the contact area between the link and the undercarriage rollers that must withstand repeated contact and wear during operation.

+Can the machine handle different track link pitches?

네. 고정물, induction coil and operating program are adjusted for each link pitch and geometry. CNC-equipped configurations store programs for different specifications, so the machine can switch between track link types without continuous manual adjustment.

+Does the production line include tempering?

네. 담광 후, the track link proceeds to a dedicated tempering section, followed by post-tempering cooling before automated transfer. Tempering adjusts the hardness and mechanical properties of the quenched material. For a related fully automated line, 자세한 내용은 automatic induction hardening and tempering line.

+What determines the induction coil design and hardening parameters?

The track link material, tread surface geometry, required surface hardness and effective case depth determine the coil design, heating pattern and quenching conditions. Hardening results are verified against the customer’s material and inspection requirements.

+What do I need to send for an equipment evaluation?

Send track link drawings or photos, 재료 등급, link pitch and main dimensions, the required tread surface treatment area, target hardness and effective case depth, and expected production quantity. Tempering requirements and inspection standards are also helpful.